Thursday, 7 August 2008

Etched Glass Doors For Interior Beauty

Are you looking for wonderful glass doors for your home or office? In the past, it's always been sturdy, heavy wooden doors that have gotten all the attention; the heavier and more elaborate the wood, the fancier your house was considered to be.

But that has changed as the modern day has dawned, and simplicity and elegance were valued over old-fashioned fanciness. Now, glass doors are more popular than ever, because of their contemporary sophistication and their ability to allow light in everywhere to give a much more open, warmer feel to the atmosphere of a room, house, store, or office.

One type of glass door in particular is the etched glass door, and these etched glass doors are essentially designs created by frosting glass. Frosted glass results in a translucent glass window, which is nice because it allows more privacy without blocking the light.

Translucent frosted glass can be used for showers and office doors-or, if you want to be a bit fancier, you can put designs on the frosted glass and make it into a glass etching, which is truly beautiful and complex.

Glass etchings are usually created by sandblasting glass in several different stages in order to create different depths of translucency if you want a more three dimensional picture (it's somewhat like shading in a drawing, and the results are very beautiful).

Popularly, etched glass is usually made up of a semi-translucent picture with a clear background. This gives the glass a nice, elegant look while still maintaining transparency and allowing plenty of light through.

The alternative is to use an etched piece of glass with a frosted background, though It's recommended if your frosted background is significantly lighter than the actual etching to make the contrast more apparent.

If you have a garden, then consider using etched glass doors as the door to your garden; it will lend both an old-fashioned and modernistic style to your beautiful garden.

The actual process of etching glass is a little more complicated. There are several modern ways of frosting the glass in that way; there's sandblasting, which is slightly less accurate, and also etching via the Leptat acid process.

The sandblasted frosted glass gives a more abrasive look, while the Leptat acid process creates a crystalline surface with much texture that is deeply etched. The Leptat acid process originated in a Czechoslovakian glass exhibit that was at the World's Fair in Osaka, Japan.

The Leptat etching process is often considered the more expensive and more elegant of the two, because instead of simply creating a rough sheen over the glass, the Leptat acid process creates a beautiful reflective surface that is etched and carved as if it were an intricate gem, and light reflects off the Leptat etched glass from many different angles.

If you'd like, you can create your own glass etching designs using etching cream, though these may not be as beautiful as etchings through the Leptat etching process. However, homemade glass etching can be fun and is safe as long as you take precautions not to allow the glass to cut your hands. offers etched glass doors, sliding glass doors, and other types of doors for interior design and functionality.

Article Source: